DC/DC custom units and blocks
AC/DC: JETDiR-MIL-SUB-525
Custom- Power
- 525W
- Density
- 12W/in³
- Efficiency
- 92.5%
- Power
- 32W
- Efficiency
- 85%
- MIL-STD-461 built-in
- Power
- 70W
- Efficiency
- 87%
- MIL-STD-461 fully included
- Power
- 500W
- 40-170 (tran. 200) VDC in, 75-110 VDC out
- Power
- 1500W
- Efficiency
- 94%
- Unlimited output capacity charging
- Power
- 1600W
- Efficiency
- 88%
- MIL-STD-461F built-in
- Power
- 4000W
- 7 independent outputs
- Ethernet LAN control
- Power
- 16.5kW
- 11 independent outputs
- Ethernet LAN control
Compare to scale
Footprints of the whole series, 2 px = 1 mm
- AC/DC: JETDiR-MIL-SUB-525 180 × 160
- DC/DC: 1600 W JETDiR-MIL 124 × 70
- DC/DC: 1500 W JETDiR1500 119 × 63
- DC/DC: 700 W JETDiR700 117 × 61
- DC/DC: 70 W JETDiR70 61 × 59
- DC/DC: 32 W JETDiR32 60 × 22

AC/DC: JETDiR-MIL-SUB-525
- Footprint × height
- 180 × 160 × 25 mm
- Power · efficiency
- 525 W · 92.5 %
- Power density
- 12 W/in³

DC/DC: 32 W JETDiR32, 270 Vin, “Alodine” coating, MIL-STD-461 built-in
- Footprint × height
- 60 × 22 × 15 mm
- Power · efficiency
- 32 W · 85 %

DC/DC: 70 W JETDiR70, 180 Vin, “Alodine” coating, MIL-STD-461 built-in
- Footprint × height
- 61 × 59 × 13 mm
- Power · efficiency
- 70 W · 87 %

DC/DC: 700 W JETDiR700, 27-40 VDC out
- Footprint × height
- 117 × 61 × 13 mm
- Power · efficiency
- 700 W · 92 %

DC/DC: 1500 W JETDiR1500, 370 Vin, “Alodine” coating
- Footprint × height
- 119 × 63 × 15 mm
- Power · efficiency
- 1500 W · 94 %

DC/DC: 1600 W JETDiR-MIL, 100-210 VDC in, 28 or 48 VDC out, MIL-STD-461F built-in
- Footprint × height
- 124 × 70 × 35 mm
- Power · efficiency
- 1600 W · 88 %
Outlines simplified to the overall dimensions from the datasheet.
Frequently Asked Questions
Can I request a custom DC/DC converter with non-standard input voltage ranges?
Absolutely. Many specialized battery-powered or vehicle-based systems operate on unconventional DC buses that fall outside the standard 24V or 48V ranges. We can adapt our DC/DC topologies to handle unique input windows, including ultra-wide ranges or specific transient requirements (e.g., matching MIL-STD-1275 or MIL-STD-704), ensuring your system remains stable despite severe input voltage fluctuations.
Is it possible to integrate multiple isolated output channels into one custom DC/DC module?
Yes, and this is one of our most requested custom features. To save critical board space and reduce total system weight (SWaP optimization), we can design a bespoke multi-output DC/DC converter. Instead of using three or four separate modules, we can provide a single, ruggedized unit with multiple independently regulated and galvanically isolated outputs (e.g., 3.3V, 5V, and 12V) tailored to your specific load requirements.
How do you handle custom form-factors for tight equipment compartments?
When a standard “brick” simply won’t fit, we offer mechanical form-factor adaptation. Using our in-house CNC milling capabilities, we can design custom aluminum or copper enclosures with specific mounting points, unique shapes, or specialized connector placements. This allows you to integrate high-power DC/DC conversion into oddly shaped cavities in UAVs, missiles, or compact portable electronics without a full system redesign.
How long does it take to develop a custom DC/DC solution?
By using our “Modified Standard” engineering approach, we significantly shorten the development cycle. Since we base our custom designs on our field-proven, ruggedized internal building blocks, we don’t have to reinvent the core technology. This results in much lower Non-Recurring Engineering (NRE) costs and allows us to deliver fully functional, flight-ready prototypes in a fraction of the time required for a traditional ground-up development.
Can your custom DC/DC converters survive extreme aerospace environments?
Without compromise. Every custom DC/DC module we build inherits the same “hardened” DNA as our standard series. This includes full internal potting, advanced planar magnetics, and an operating case temperature range from -60°C up to +125°C. Whether your custom unit is destined for a high-altitude unpressurized compartment or a high-vibration engine bay, it will be engineered to meet or exceed MIL-STD-810G environmental requirements.
Need different input or output? We can adapt this design.
Discuss your project