Standard JETDis, 15 W - 100 W, copper case without mounting holes, "low cost", ultrawide input

AEPS-GROUP “low-cost” power converters of JETDis series in standard “Brick” formfactors are designed for ultrawide input of DC mains 48W (9-80 VDC). Because of that – the units cover almost all application fields.

JETDis series consists of JETDis15, JETDis25, JETDis50 and JETDis100. The numbers state maximal output power in Watts, however to ensure long-term reliability the loading coefficient should be chosen from 0.7-0.8. Therefore, the series units are optimized for average power of 102040 and 80 W respectively.

Constructional features: series units JETDis are made in compact dimensions and together with high efficiency the units achieve power density of 37 to 69 W/inch3. Considering that all components are constructively connected to the base and submerged in hardened heat-transferring potting – resistance to and durability against mechanical stress is unique. However, it’s important to consider that mounting the units to a PCB is to be done mainly by its pins. Therefore, when using the units in certain cases it’s important to provide for additional bracing.

AEPS-GROUP JETDis units are optimal to be utilized in application fields 2, 3, 4, 5, 7, 8, 9, 11 – in environments without any significant mechanical factors (impacts and vibrations) – drones, hot air balloons and gliding devices, meteo-probes. Also applied in all types of land transport – railway locomotives and wagons, cars, tracked vehicles. The units are also an optimal fit for telecom equipment, mining, supercomputers, radars and informational displays and screens, located in outdoors conditions. At the same time, the units are able operate in Arctic and Antarctica, in mountains at all heights and in cold or hot deserts etc.

To know more, read following essays: About input ranges, About efficiencyAbout planarity.

JETDis15-С1

Up to 15 W nominal output power
Power density up to 36 W/In³
Efficiency up to 88 %
32x21x10 mm
Case operating temp. range -40° to +110° C
Product detail PDF Datasheet

JETDis25-C2

Up to 25 W nominal output power
Power density up to 61 W/In³
Efficiency up to 89 %
26x26x10 mm
Case operating temp. range -40°...+110° C
Product detail PDF Datasheet

JETDis50-C3

Up to 50 W nominal output power
Power density up to 62 W/In³
Efficiency up to 91 %
51x26x10 mm
Case operating temp. range -40°...+110° C
Product detail PDF Datasheet

JETDis100-C4

Up to 100 W nominal output power
Power density up to 69 W/In³
Efficiency up to 92 %
58x37x11 mm
Case operating temp. range -40°...+110° C
Product detail PDF Datasheet